I believe we all know that the working principle of the central feeding system lies in that the vacuum conveying mode is adopted to convey the plastic raw materials from the storage tank to the central dehumidification drying system through a centralized pipeline system and then the dried raw materials are delivered to each injection molding machine in.
The central feeding system is equivalent to adopting the design method of "one machine and one tube", and ensures that the air of the whole system is transported to the raw materials, which can well prevent the resurgence of the raw materials after the dehumidification and drying. The use of the central feed system to achieve a stable operation of each transport line, no blocking phenomenon. So why do you say that the central feeding system is designed for the production of plastic products for the injection molding shop? Why do we have to choose the central feeding system for the injection molding shop? Do you understand this problem? Under analysis
Injection workshop selection of central feeding system reasons:
1, Coloring process automation, anti-blocking:
The central feeding system can achieve uninterrupted unmanned continuous forming operation, in the operation process can be changed according to the needs of raw materials, the use of multi-color materials in combination to achieve the coloring process automation. The ability to regenerate and use the cold feed in a fully automatic manner enables control of all feeding equipment and prevents blockages in the silo and increases the productivity of the injection molding shop.
2, to meet the requirements of a variety of products:
central centralized feeding system uses a microcomputer centralized automatic control of the pellets 24 hours continuous feeding operation, mixing, accurate measurement, and flexible color change, we can see that it Adapt to the multi-color multi-product requirements of the products in the injection workshop.
3, safe and reliable work:
According to the production of different molding machines, flexible changes in the amount of feed. Multiple feed pipe design, to ensure that the main injection molding shop diversification requirements, with a variety of monitoring and protection functions, work safe and reliable.
4, to adapt to any injection molding plant injection equipment:
The central feeding system can be achieved by a variety of automatic feeding of raw materials to any room more than any injection molding equipment used, which can include raw material color processing, drying and proportionate crushed recycled materials utilization , To implement a high degree of automation control, monitoring and so on.
5, easy to operate, energy saving:
Central feed system easy to operate, only a few people can control the supply of the entire injection molding plant, thus reducing the cost of a large number of labor. At the same time, it also reduces the raw material belt and corresponding auxiliary equipment beside the injection molding machine, and improves the utilization of the space. In addition, due to the central feeding method, a large number of single equipment is correspondingly reduced, saving electric energy and reducing maintenance costs.
After the above introduction, injection molding workshop why choose the central feeding system is self-evident, in addition, the central feeding system will make raw materials and dust on the injection molding production pollution to the lowest extent, can maintain a clean production workshop , While the central feeding system unique focus on dust recovery system, cleaning more convenient, good environmental protection and reduce noise, and ultimately unmanned automatic production workshop to establish a modern factory management image.